Verfügbarkeit für Abholungen konnte nicht geladen werden
The 3S 11.1V 12.6V 60A 18650 Li-Ion Battery Charger Protection Board is a sensor module designed for balanced charging of 18650 Li-Ion batteries. It is suitable for use in Arduino and SCM supplies.
Charging voltage: 12.6V-13.6V
Continuous charging current (upper limit): 10A
Continuous discharge current (upper limit): 60A
Suitable for lithium batteries with a nominal voltage of 3.7V and a full voltage of 4.2V
Compatible with 18650, 26650, polymer lithium batteries
Product weight: enhanced version approximately 8.8 g, balanced version approximately 9.8 g
Size: enhanced version approximately 41 x 55 x 3.4 mm, balanced version approximately 41 x 62 x 3.4 mm
Enhanced version suitable for drills with a starting current of up to 120A and power of up to 260W
Equalized version suitable for drills with starting current up to 120A and power up to 260W
Requires three 10C-20C power batteries or six 5C-10C power batteries for drill operation
Requires six 15C-20C power batteries or twelve 10C-15C power batteries for motorcycle operation
Wiring must follow the specified diagram
Resistor will heat up and discharge if a single battery exceeds 4.2V
